ATMOSFERA® presents a wide line of self-regulating heating cable by Korean manufacturer Lavita®, which may provide with solution of different tasks starting from household heating and finishing with maintenance of temperature in pipelines at industrial facilities.
GWS - 2CR
Heating the pipelines (usual and explosion hazardous areas)
Self-regulating cables Lavita from series GWS 10/16/24/30-2CR are designed to protect the pipelines against freezing or to maintain the temperature of liquid in pipelines and industrial reservoirs up to 85°C. The cables may be applied both in safe and explosion hazardous areas. They may be arranged both outside and inside a pipeline. Its peculiarity is that the cable automatically adjusts its heat output depending on ambient-temperature. The heating element in hot sites extends and almost completely breaks the conductor paths. Hereby, the electric resistance of material becomes very high that causes to cessation of heating.
HWS – 2CR
Maintaining the temperature of pipelines with hot water
Self-regulating cables Lavita from series HWS 10/30 – 2CR are designed to maintain the temperature in hot water supply systems. If you install this cable, you do not need to develop the complex recirculation systems using the additional pumps, pipes, valves and taps that improve the economical efficiency in operation of water supply system.
TMS – 2CR (CT)
Industrial heating the pipelines (usual and explosion hazardous areas)
Self-regulating cables Lavita from series TMS 30/40/50 – 2CR (CT) are designed for use in industrial heating systems of pipelines and reservoirs (maintaining the technological temperatures of liquids up to 85°C). The outer shell is made in two variants: poliofilin and fluoropolymer (fluoropolymer is used at places, where the corrosive chemical solutions and vapors may be present). The cables may be used in the explosion hazardous area.
GWS40 – 2CR
Self-regulating cables Lavita from series GWS40 – 2CR are designed to heat the floors in residential and industrial premises. The parallel structure and self-regulation function significantly simplifies the installation of warm floor, based on self-regulating cable.
The cable may be cut by any length, the terminal box may easily be installed at any place, if necessary, and the cable may easily be increased.
RGS – 2CR
Self-regulating cables Lavita from series RGS 30/40 – 2CR (CT) are designed for use in cable anti-icing systems for roofs and storm sewage. The power of cable is increased by two times in the snow and in the melt water. The outer shell has the protection against ultra violet. The roof heating system with the use of self-regulating cable has the following advantages:
- Excludes the formation of ice crust and icicles
- Increases the service life of roof and storm sewage (thanks to absence of ice and leakages)
- Does not require any disassembly for the summer
SMS – 2CR
Heating the open areas
Self-regulating cables Lavita from series RGS 30/40 – 2CR (CT) are designed for use in cable anti-icing systems for open areas. The cable is characterized by larger nominal capacity (80W per line meter) and durability of outer shell. This cable has a wide scope of application, namely: concrete roads, parking spaces, access paths, steps, bridges, etc.