Crystal PV modules

This production technology of PV modules has already become “classical” one. The crystal PV module consists of some silicon photovoltaic cells, connected between themselves, using buses. The crystal PV panels provide with maximum capacity per unit of installed area. Thanks to a wide range of clamps and aluminum frame, these PV modules may be installed to any surface with minimum expenses for assembly. The efficiency of crystal PV modules is in average 15%, the specific generation in Central Europe (Germany, Poland, Ukraine, Belarus and midland of Russia) is about 1 kW h per 1 W of installed capacity for a year.

The crystal PV modules ABi-Solar are made at certified production in Eastern Asia. The standards and requirements, especially designed to receive the maximum efficiency at use under conditions of insolation ≈1,200 kW h/m ² per year, inherent to the central European region – the widths, where Germany, Poland, Ukraine, Belarus and midland of Russia are located, are applied at manufacture of PV panels.

Each PV module ABi-Solar passes through testing, during which its technical parameters are measured. Thus, purchasing PV modules ABi-Solar for installation in Central Europe, you receive the guaranteed technical performance and optimal parameters of generation for solar power plant in general.

Polycrystal PV modules ABi-Solar are designed for 12 and 14 V systems. PV modules ABi-Solar are an excellent product to be used in stand-alone and on-grid PV systems.

Polycrystal PV modules ABi-Solar have one of the best performance factors in industry – 16%. The positive power allowance is 0~+3% that is confirmed by tests of each PV panel.

The guaranty for 95% of efficiency is 5 years, 90% of efficiency – 12 years, 85% of efficiency – 18 years, 80% of efficiency – 25 years.

Monocrystal PV modules ABi-Solar have one of the best performance factors in industry – 18%.
Each monocrystal PV module ABi-Solar passes through testing, during which its efficiency, capacity and other parameters are recorded.

The guaranty for 95% of efficiency is 5 years, 90% of efficiency – 12 years, 85% of efficiency – 18 years, 80% of efficiency – 25 years.

German company “Sharp” has been working in the solar energy since 1959 and has become the leading designer of photovoltaic systems in the world.
The PV modules Sharp are installed in private houses, public buildings and residential houses, on satellites, beacons, traffic control systems and in industry. The PV modules Sharp may be used in the most various conditions.

The PV modules Sharp, manufactured in Germany, have the high quality and performance. The power of modules is 250-300 W (peak). The PV modules Sharp have a very high KPI – up to 19.8%. The quality of each panel is confirmed by certificates of TUV, IEC / EN61215, IEC / EN61730 and past tests: Ammonia test (DLG focus test) and salt fog test (IEC61701).

The warranty for product is 10 years; the warranty for linear output power is 25 years.

JA Solar Holdings Co., Ltd. is the world leader in manufacture of high-performance products for solar energy. The company was established on 18, May, 2005 and since 7, February, 2007 its shares are listed on stock market NASDAQ. The products of JA Solar are used in residential and commercial sphere, as well as within the context of projects for ground photovoltaic power plants.

Module 4BB is designed taking into consideration the reduction in resistance of components in series and mechanical stresses between units of their connection that improves the reliability and KPI of energy conversion in modules.
The high output power and the key performance indicator of module is up to 16.99% are confirmed by audit company TUV Rheinland. It is designed for systems IEC 1000 V.
The anti-glare and anti-mud cover decreases the power losses as a result from available mud and dust. There are the excellent performance characteristics under conditions of low level in lighting.
The excellent durability under effect of stresses: certificate of stability to high wind (2,400 Pa) and snow loads (5,400 Pa).

The warranty for product is 12 years; the warranty for linear performances of output power is 25 years.

C&T Solar offers a number of innovative solutions for solar energy. The company produces the reliable solar energy equipment for different spheres of application both for private and industrial projects.

The solar module (solar framed module) is made in the form of panel, encased into the frame from aluminum shape. The panel is the photovoltaic generator that converts the light flux into electric energy, consists of hardened antireflection anti-glare surface of glass plate with leak-proof laminated elements on it. The terminal block, designed for connection of panel, is on the backside.